1

ZK-SK Voice Control Delay Switch Module — Sound Activated Switch (DC 3–9V, 1.5A, 10s Delay)

Rs  350

A complete sound-activated switch on one board. Clap or speak and it powers your load for about 10 seconds, then switches off by itself. Runs on DC 3–9V and drives up to 1.5A directly — a small motor, fan or high-power LED — with no Arduino and no code needed.

  • Delivered in 2–3 days nationwide
  • Cash on delivery available
  • Genuine products only

ZK-SK Voice Control Delay Switch — clap, and it powers your circuit for 10 seconds

This is a complete sound-activated switch on one small board. It is not just a sensor that outputs a signal for a microcontroller to read — it does the switching itself. Clap, speak or make any sharp sound near the on-board electret microphone and the module powers whatever is connected to its OUT+ / OUT− terminals for about ten seconds, then switches off on its own. No Arduino, no code, no relay needed.

With 1.5A of drive capability it is happy running a small DC motor, a cooling fan or a high-power LED directly, and a built-in anti-interference circuit stops motor noise and electrical spikes from triggering it by accident.

Specifications

  • Model: ZK-SK
  • Operating voltage: DC 3–9V
  • Maximum output current: 1.5A
  • Delay time: approximately 10 seconds, fixed (not adjustable)
  • Sensor: on-board electret microphone
  • Output: OUT+ / OUT− direct-drive terminals, with a red LED that lights while the output is active
  • Board size: 31 × 25 × 12 mm, with mounting holes
  • Extras: built-in anti-interference circuit to prevent false triggering

Important — read before you wire it

This module switches a low-voltage DC load on its output terminals. It is not a relay and must never be connected to 220V mains. If you want to switch a mains bulb or appliance with sound, use this module (or a sound sensor) to trigger a proper relay module rated for mains voltage.

What you can build with it

  • Clap-activated lights for a hallway, cupboard or staircase
  • Sound-triggered cooling fans that run for a burst and stop
  • Interactive toys, model cars and science-fair exhibits that react to a shout
  • Simple clap switches for school and college projects — no programming required
  • A hands-free trigger for any 3–9V DC load under 1.5A

Why buy it from Arduino Corner

Because it is the fastest way to get a working clap switch. The sensor-only modules people usually buy still need a microcontroller and a relay before anything actually turns on — this one is finished the moment you connect power and a load. Genuine module, correctly specified, at the best price in Pakistan.

Visit us: Smart Home | Arduino Corner, Shaheen Market, DAV College Road, Rawalpindi. Same-day delivery across Rawalpindi and Islamabad, cash on delivery all over Pakistan.

Product specifications

SKUACE-100820
CategoryAudio & Sound Modules, Lighting, Bulbs & LEDs, Modules
AvailabilityIn stock

Visit our shop

  • 📍 Smart Home Arduino Store
    Shaheen Market, DAV College Road, Rawalpindi
  • 🕘 Open Saturday–Thursday — 10:00 AM to 9:00 PM (closed Friday).
  • 💬 Call or WhatsApp: 0332 5920236 — tell us your project and we will help you pick the right parts.
  • 🏪 In-store pickup. Buy online and collect from the shop, or just walk in and see it first.

Delivery

  • Same-day delivery across Rawalpindi and Islamabad.
  • 🚚 Nationwide delivery — flat Rs 350 anywhere in Pakistan, typically 2–3 days.
  • 💵 Cash on delivery available nationwide — plus bank transfer, JazzCash and Easypaisa.

Returns & warranty

  • 🛡️ Genuine products only. Everything is tested before dispatch — if a board or module arrives dead, we sort it out.
  • ↩️ 3-day returns (conditions apply). Please read our Return & Warranty Policy for the full details before ordering.
Order this on WhatsApp