E27 Motion Sensor Bulb Holder Z04-N Fixed (220V) — Human Body Induction
A wall or ceiling mounted E27 bulb holder with a PIR motion sensor built into the base — screw in any E27 bulb and the light turns itself on when someone walks up, then off again shortly after.
The Z04-N is the fixed version: the delay time and light threshold are preset at the factory, so there is nothing to configure — wire it in and it works. If you want to tune the on-time yourself, choose the Z04-Q Adjustable instead.
Key features
- Built-in PIR sensor — the bulb lights the moment it detects a person
- Light-control (day/night) sensing so it stays off in daylight
- Standard E27 socket — takes LED, energy-saver or filament bulbs
- Surface-mounts to a wall or ceiling; wires straight into your 220V lighting circuit
- Touch-free — nothing to switch, nothing to forget
- Screws and wall plugs included
Where people use it
Staircases, corridors, entrance gates, basements, store rooms, garages and back yards — anywhere a light gets left burning because nobody wants to walk back to the switch.
Which version should I buy?
Z04-N (this one) — fixed timing, simplest to install. Z04-Q — adds an adjustment knob so you can set how long the light stays on.
Wiring & installation guide
We wrote a full guide with a connection diagram for this: E27 motion sensor bulb holder: wiring, setup and Z04-N vs Z04-Q — the two-wire connection diagram and which version suits your room.
Why buy from Arduino Corner
Genuine, tested smart-home gear at the best prices in Pakistan. Visit us: Smart Home | Arduino Corner, Shaheen Market, DAV College Road, Rawalpindi. Same-day delivery in Rawalpindi & Islamabad, cash on delivery nationwide.
